These LED strip light mounting clips are upgrading design,Compare with traditional one-side fix clip have fellow advantages:
1)Widen and tight: hollow heigh only 2.2mm/0.08inch (the old one is 3.0mm) so this led mounting bracket more firmly fix IP65 waterpoof led strip.more tight
never worry about the led strip light slide or drop.
2)Pure transparent: light transmittance from 90% increase to 98% more easy to hide in plain sight.
Note:Before buy this led strip mounting brackets pls check up your led strip light width and height.
1.Only suit for 10mm/0.39inch width silicone glued(IP65) flexbile led strip light which is DC12V/24V input.eg
SMD5050 30/60/72leds/meter RGB/RGBW/CCT color
2.Can not use for IP20/IP67/IP68 led strip light or led rope light.
Suit for led strip light connect wire type:18AWG, 20AWG
Use and Installation:
1.Before installing the clips. Please make sure the light power trun off.
2.Use drill tools punch holes in cement wall/tile wall/thick metal surface and make the markings.For wood/thin metal surface no need puch holes in advance
3.Putting screws through the clips and then fixed the screws in the marked holes(Please be careful not to tighten it completely).
4.Adjust led strip continue to tighten the screw until the clip completely the light strip.
5.Check all fixed clips.
suggest using 3-5 pieces clips within 1 meter long strip lights
Product Size: L:22.6mm/0.89inch Width:6.90mm/0.27inch Height:3.90mm/0.15inch.
Inner Width: 10.5mm/0.41inch
Flame retardant rating: UL94V-0
100 pcs led strip fixing clips(transparent)
102 pcs screws
B. UV resitant material: Perfect for indoor and outdoor use without change to yellow for a long time.
C. Magnetic Screws: Rust-proof and 80 degree hardness suit for wood/plastic board/metal/cement wall etc.
D. Transparent Color : 98% light transmittance and no damage to your leds color temperature.
E. Multifunction: Hold led strip light wire 2PIN single color/4PIN RGB/5PIN RGBW/18#/20#/22# AWG wire firmly.